Zero-Max® Specials Go to Input/Output Shaft Arrangements Go to Intermittent Drives Go to Puller Drives for Industrual Sewing Industry Go to Seeder Drives Control Options Customers may make their own custom control adaptions to the standard Zero-Max Drive (i.e. linkages, flexible shafting for remote operation of screw control, motorized screw control, etc.)
Extended Lever		Lever at 6 or 9 O'Clock		Extended Control Stub
Extended Screw Control			Flatted and Drilled Lever

Different Input/Output shaft arrangements
In addition to the standard drives, these special shaft arrangements are
available. Not all models are available with lever or screw controls.
Consult factory for control options available.
On drives with double shaft, determine rotation by looking at output
shaft on the same side as the control lever.

Back to top of page

Intermittent Drives
Variable index units that give a pulsing output motion that can be synchronized to indexing motions on industrial equipment. An increase of the speed control lever on unit will increase the number of degrees of index per pulse. An application example would be for an in-feed to a stamping press.

Back to top of page

Puller Drives
Continuous and Intermittent Drives for Pullers and Metering Devices on
industrial sewing machines.

Back to top of page

Seeder Drives
Standard units offering up to a 4:1 ratio and special units offering up to a 1:1 ratio for Air Seeders in the Agricultural Industry. Used for applying seed and/or fertilizers to the field.

Back to top of page

The right to make engineering refinements on all products is reserved.
Dimensions and other details subject to change.
When dimensions are critical, detailed drawings should be obtained from the factory.

Send mail to zero-max@zero-max.com with questions or comments about this web site.
13200 Sixth Avenue North • Plymouth, MN 55441
1-800-533-1731 • 763-546-4300 • Fax:763-546-8260

Copyright^© 2007 Zero-Max, Inc.